2022 High quality General Waterproof Slurry - Waterproof Coating K11 General Flexibility Cement Based – Dongchun

Dongchun K11 General waterproof coating is a polymer-modified cement-based waterproof material. Powder composed of high-quality cement, quartz sand and additives, mixed with polymer emulsion in proportion. It can penetrate into the interior of the substrate and form crystals, blocking the passage of water from all directions. It is a green and environmentally friendly product.

Dongchun K11 Flexible waterproof coating is a cement-based waterproof material modified by acrylic polymer. It is a two-component product, which is composed of powder prepared by high-grade cement and imported additives, and then mixed with acrylic polymer emulsion. After the powder is mixed with the acrylic polymer, a chemical reaction takes place to form a tough elastic waterproof membrane. The membrane has good adhesion to concrete and mortar, and can form a tight and firm permanent bond with it, preventing the penetration of water, and is a water-based environmental protection product.

Dongchun K11 Cement-based waterproof coating has strong elasticity and anti-cracking function, which can slow down the expansion of the micro-cracks of the substrate to the finishing layer. At the same time, it has a significant waterproof effect and can withstand certain loads and deformations. And can inhibit the growth of mold and prevent salt pollution, suitable for use in a variety of humid, long-term water immersion environment. This product has superior performance and remarkable waterproof effect, providing permanent protection for the entire building waterproofing system.

Scope of Application

1. Indoor and outdoor cement concrete structure, brick wall, light brick wall structure;

2. Subway stations, tunnels, civil air defense projects, mines, building foundations;

3. Walls, floors, bathrooms, toilets;

4. Edible pools, swimming pools, fish ponds, sewage treatment pools;

5. Moisture and seepage prevention for basements, planters, floors, etc.;

6. Apply on the substrate before paving stone, ceramic tile, wooden floor, wallpaper and gypsum board as a pre-layer treatment to prevent moisture and salt pollution.