Tile trims, also known as the positive angle closing strip or the positive angle strip, is a decorative line used for the 90-degree convex angle wrapping of tiles. It takes the bottom plate as the surface, and makes a 90-degree fan-shaped arc surface on one side, and the material is PVC, aluminum alloy, and stainless steel.
There are anti-skid teeth or hole patterns on the bottom plate, which are convenient for full combination with walls and tiles, and the edge of the fan-shaped arc surface has a limited bevel, which is used to limit the installation position of tiles or stones.
According to the thickness of the tiles, the trims are divided into two specifications, the large open angle and the small open angle, which are suitable for 10mm and 8mm thick tiles respectively, and the length is mostly about 2.5 meters.
The tile trims are widely used because of its advantages of simple installation, low cost, effective protection of tiles, and reduction of collision hazards caused by 90-degree lobes of tiles.
How much damage does not using tile trims do to the decoration?
1. The grinding operation of tiles requires a large amount of work and requires high technical requirements for workers.
2. The tiles with poor quality will have uneven brick edges, and the edges will be easy to burst when edging.
3. After the tile is edged, the edge of the tile becomes thin, fragile and easy to break.
4. Noise and dust pollution caused by edging do not conform to the trend of environmental protection.
5. After a long time, there will be gaps in the joints of the tiles, dust will enter, resulting in dirty and unsanitary.
Advantages of using tile trims
1. Easy to install, save labor, time and material. When using the tile trims, the tile or stone does not need to be ground, chamfered, and the worker who can paste the tile and stone only needs three nails to complete the installation.
2. The decoration is beautiful and bright. The curved surface of the tile trims are smooth and the line is straight, which can effectively ensure the straightness of the corner of the wrapping edge and make the corner of the decoration more three-dimensional.
3. Rich in color, it can be matched with the same color to achieve the consistency of the brick surface and the edge, or it can be matched with different colors to form a contrast.
4. It can well protect the corners of tiles.
5. The product has good environmental performance, and the various raw materials used have no adverse effect on the human body and the environment.
6. Safe, the arc eases the right angle to reduce the harm caused by the collision.
The use of tile trims
1. Use three nails to fasten the tile trim to the installation place so that the tile trim is parallel to the wall.
2. Spread the tile adhesive or cement on the tile trim, paste the tile, and keep the arc surface of the tile trim and the joint of the tile tightly.
3. Lay the tiles on the other side, make the tiles against the tile trim, keeping the contact smooth and seamless.
4. After the tiles are laid, clean the tile trims and arc surfaces of the tiles, and the installation is complete.
Post time: Apr-18-2022